添加 AD盒模拟器 电池涂布 添加泵损坏导致纵向波动模拟

Project.FLY.FlyADBase/FLY.Simulation.Coating/Coating.cs

@@ -57,7 +57,10 @@ namespace FLY.Simulation.Coating
         public List<DataInfo> Datas_Horizontal = new List<DataInfo>();//横向数据
         double datas_horizontal_avg = 0;
         int datas_vertical_position=0;
-
+        /// <summary>
+        /// 由于泵损坏带来的纵向波动
+        /// </summary>
+        double datas_vertical_pumpDamaged = 0;
 
         //30m 后的数据
         public List<DataInfo> Datas_Vertical_30m = new List<DataInfo>();//纵向数据
@@ -65,6 +68,7 @@ namespace FLY.Simulation.Coating
         int datas_vertical_30m_position=0;
 
 
+
         /// <summary>
         /// 膜宽
         /// </summary>
@@ -123,9 +127,24 @@ namespace FLY.Simulation.Coating
         /// </summary>
         public bool HSignal2;
 
+        /// <summary>
+        /// 设备状态
+        /// </summary>
         public bool DeviceState { get; set; }
 
+        /// <summary>
+        /// 泵的转子坏了， 会看到有周期的波动，周期为 泵速
+        /// </summary>
+        public bool IsPumpDamaged { get; set; }
 
+        /// <summary>
+        /// 由于 泵的转子坏了 导致 面密度 周期的波动 的变化公差，单位g/m²
+        /// </summary>
+        public double ToleranceOfPumpBeDamaged { get; set; } = 1;
+
+        /// <summary>
+        /// 均值
+        /// </summary>
         public double Avg { get; set; }
 
         void Load_Vertical()
@@ -143,7 +162,7 @@ namespace FLY.Simulation.Coating
                     int pos_mm = int.Parse(ss[0]);
                     bool isLight = bool.Parse(ss[1]);
                     bool isLight2 = bool.Parse(ss[2]);
-                    double thick = double.Parse(ss[3]);
+                    double thick = double.Parse(ss[3]);//单位 g/m²
 
                     Datas_Vertical.Add(new DataInfo() { IsLight = isLight, IsLight2 = isLight2, Thick = thick });
                     Datas_Vertical_30m.Add(new DataInfo() { IsLight = isLight, IsLight2 = isLight2, Thick = thick });
@@ -216,8 +235,12 @@ namespace FLY.Simulation.Coating
                 return 0;
             if (mm >= FilmWidth)
                 return 0;
-
-            return Datas_Vertical_30m[datas_vertical_position].Thick * Datas_Horizontal_30m[mm].Thick / datas_horizontal_avg;
+            double d = Datas_Vertical_30m[datas_vertical_position].Thick * Datas_Horizontal_30m[mm].Thick / datas_horizontal_avg;
+            if (IsPumpDamaged)
+            {
+                d += datas_vertical_pumpDamaged;
+            }
+            return d;
         }
         public double GetData(int mm) 
         {
@@ -226,7 +249,13 @@ namespace FLY.Simulation.Coating
             if (mm >= FilmWidth)
                 return 0;
 
-            return Datas_Vertical[datas_vertical_position].Thick * Datas_Horizontal[mm].Thick / datas_horizontal_avg;
+            double d = Datas_Vertical[datas_vertical_position].Thick * Datas_Horizontal[mm].Thick / datas_horizontal_avg;
+
+            if (IsPumpDamaged)
+            {
+                d += datas_vertical_pumpDamaged;
+            }
+            return d;
         }
         /// <summary>
         /// 上一个时间点
@@ -249,18 +278,33 @@ namespace FLY.Simulation.Coating
             double filmMove = ts.TotalMinutes * FilmVelocity;
             FilmLength += filmMove;//膜位置
 
+
+
             int p1 = (int)(FilmLength * 1000 % Datas_Vertical.Count());
             if (p1 != datas_vertical_position)
             {
                 datas_vertical_position = p1;
-                Avg = Datas_Vertical[datas_vertical_position].Thick / 100.0;
-                if (AvgChanged != null) 
+
+                double avg = Datas_Vertical[datas_vertical_position].Thick;
+                
+                if (hmi_cc.NowCtrl.Pump > 0 && IsPumpDamaged)
                 {
-                    AvgChanged(FilmLength, (int)(Avg*100));
+                    // 泵损坏 周期 m
+                    double intervalOfPumpDamage = FilmVelocity / hmi_cc.NowCtrl.Pump;
+                    double index = FilmLength % intervalOfPumpDamage;
+                    double percent = index / intervalOfPumpDamage;
+                    double v = ToleranceOfPumpBeDamaged * Math.Sin(Math.PI * 2 * percent);
+                    
+                    datas_vertical_pumpDamaged = v;
+                    avg += datas_vertical_pumpDamaged;
                 }
+                Avg = avg;
+                AvgChanged?.Invoke(this, new AvgChangedEventArgs() { filmLength = FilmLength, avg = Avg });
             }
             
 
+
+
             datas_vertical_30m_position = (int)((FilmLength - OvenLength) * 1000 % Datas_Vertical.Count());
             if (datas_vertical_30m_position < 0)
                 datas_vertical_30m_position += Datas_Vertical.Count();
@@ -288,7 +332,12 @@ namespace FLY.Simulation.Coating
         /// <summary>
         /// 每1mm更新一次
         /// </summary>
-        public event Action<double, int> AvgChanged;
+        public event AvgChangedEventHandler AvgChanged;
+        public delegate void AvgChangedEventHandler(object sender, AvgChangedEventArgs args);
+        public class AvgChangedEventArgs : EventArgs {
+            public double filmLength;
+            public double avg;
+        }
         public event Action DatasChanged;
         public event Action Datas30mChanged;
         public void NotifyDatasChanged() 
@@ -317,12 +366,13 @@ namespace FLY.Simulation.Coating
         public string[] GetSavePropertyNames()
         {
             return new string[] { 
-                "Port",
-                "CoatingMode"
+                nameof(Port),
+                nameof(CoatingMode)
             };
         }
     }
 
+
     /// <summary>
     /// 涂布控制量
     /// </summary>

Project.FLY.FlyADBase/FLY.Simulation.Flyad7/FLYAD7.cs

@@ -330,8 +330,8 @@ namespace FLY.Simulation.Flyad7
             }
             else
             {
-                Now += FlyADBase.TimeGridAdvHelperExt.ad_ts;
-                systick += FlyADBase.TimeGridAdvHelperExt.ad_ts_ms;
+                Now += TimeSpan.FromTicks((long)(1.28 * TimeSpan.TicksPerMillisecond));
+                systick += 1.28;
             }
 
             UpdateAD();
@@ -385,7 +385,7 @@ namespace FLY.Simulation.Flyad7
                     TimeGridEvent.Invoke(this,
                         new TimeGridEventArgs(
                             Now,
-                            FlyADBase.TimeGridAdvHelperExt.ad_ts,
+                            TimeSpan.FromTicks((long)(1.28 * TimeSpan.TicksPerMillisecond)),
                             TimeGrid.ToArray()));
                 }
                 TimeGrid.Clear();

Project.FLY.FlyADBase/FLYAD7_Simulation_Wpf/WindowCoating.xaml

@@ -97,8 +97,13 @@
 
             </Grid>
             <StackPanel>
-                <CheckBox Content="设置位" FontSize="18" FontWeight="Bold" Height="23" Margin="3" VerticalAlignment="Center" FlowDirection="RightToLeft" IsChecked="{Binding OK}" DataContext="{Binding DataContext,ElementName=hmi}"/>
-                <CheckBox Content="涂布状态" FontSize="18" FontWeight="Bold" Height="23" Margin="3" VerticalAlignment="Center" FlowDirection="RightToLeft" IsChecked="{Binding DeviceState}" IsEnabled="False"/>
+                <CheckBox Content="设置位" FontSize="18" FontWeight="Bold" Height="23" Margin="3" IsChecked="{Binding OK}" DataContext="{Binding DataContext,ElementName=hmi}"/>
+                <CheckBox Content="涂布状态" FontSize="18" FontWeight="Bold" Height="23" Margin="3" IsChecked="{Binding DeviceState}" IsEnabled="False"/>
+                <CheckBox Content="泵损坏" FontSize="18" FontWeight="Bold" Height="23" Margin="3" IsChecked="{Binding IsPumpDamaged}" />
+                <StackPanel Orientation="Horizontal">
+                    <TextBlock Text="泵公差" FontSize="18" FontWeight="Bold" Height="23" Margin="3" />
+                    <TextBox Text="{Binding ToleranceOfPumpBeDamaged }" FontSize="18" MinWidth="50"/>
+                </StackPanel>
             </StackPanel>
             
         </StackPanel>
@@ -122,7 +127,7 @@
             </ComboBox>
             <TextBlock FontSize="18" FontWeight="Bold" Height="23" Margin="3" VerticalAlignment="Center" >
                 <Run Text="当前平均值:" />
-                <Run Text="{Binding Avg}" />
+                <Run Text="{Binding Avg,StringFormat={}{0:F2}}" />
             </TextBlock>
         </StackPanel>
         <Grid Margin="12,3" Grid.Row="2">

Project.FLY.FlyADBase/FLYAD7_Simulation_Wpf/WindowCoating.xaml.cs

@@ -44,12 +44,13 @@ namespace FLYAD7_Simulation_Wpf
             DataBindAll();
 
             mCoating.DatasChanged += new Action(mCoating_DatasChanged);
-            mCoating.AvgChanged += new Action<double, int>(mCoating_AvgChanged);
+            mCoating.AvgChanged += MCoating_AvgChanged;
         }
 
-        void mCoating_AvgChanged(double arg1, int arg2)
+        private void MCoating_AvgChanged(object sender, Coating.AvgChangedEventArgs args)
         {
-            int filmlength_cm = (int)(arg1*100);
+
+            int filmlength_cm = (int)(args.filmLength * 100);
             if(FilmLength_cm == filmlength_cm)
             {
 
@@ -73,7 +74,7 @@ namespace FLYAD7_Simulation_Wpf
                 }
                 datas.Clear();
             }
-            datas.Add(arg2);
+            datas.Add(args.avg);
         }
 
         void mCoating_DatasChanged()

Project.FLY.Misc/MISC/RangeStruct.cs

@@ -150,14 +150,32 @@ namespace Misc
             };
             if (r.End < r.Begin)
             {
-                return new RangeStruct();
+                return InvalidValue;
             }
             else
             {
                 return r;
             }
         }
-
+        /// <summary>
+        /// 范围 减
+        /// </summary>
+        /// <param name="a"></param>
+        /// <param name="b"></param>
+        /// <returns></returns>
+        public static RangeStruct operator -(RangeStruct a, RangeStruct b)
+        {
+            if (a.Begin < b.Begin)
+            {
+                return new RangeStruct(a.Begin, b.Begin - 1);
+            }
+            else {
+                if (a.End > b.End)
+                    return new RangeStruct(b.End + 1, a.End);
+                else
+                    return InvalidValue;
+            }
+        }
         /// <summary>
         /// 范围 a小于b
         /// </summary>