Merge remote-tracking branch 'remotes/gitlab/dev7.0-filmCasting' into dev7.0

Project.FLY.FlyADBase/FLY.Simulation.Blowing/Blowing.cs

@@ -162,7 +162,8 @@ namespace FLY.Simulation.Blowing
         /// </summary>
         public double CurrFilmVelocity { get; private set; }
         #endregion
-        public HMI mHMI;
+        public IPlcLink plcLink;
+        
         public int Avg { get; set; }
 
         public double[] mFilmLength3D;
@@ -267,16 +268,21 @@ namespace FLY.Simulation.Blowing
             mAirRing2.AfterDatasUpdateEvent += new Action<ObservableCollection<int>>(mAirRing2_AfterDatasUpdateEvent);
             Avg = (int)(BeforeDatas.Average());//原始平均值
 
+            mAirRing2.Bads[2] = true;
+            mAirRing2.Bads[30] = true;
+            mAirRing2.Bads[31] = true;
+
             TestPos = 500;
             UpdateTestHeat();
 
             //AfterDatas.CollectionChanged += new System.Collections.Specialized.NotifyCollectionChangedEventHandler(AfterDatas_CollectionChanged);
             PropertyChanged += new PropertyChangedEventHandler(Blowing_PropertyChanged);
 
-            mHMI = new HMI();
-            mHMI.mAirRing = mAirRing2;
-
-
+            //plcLink = new HMI();
+            //plcLink.Init(mAirRing2);
+            var plc = new PlcLink();
+            plc.Init(mAirRing2);
+            plcLink = plc;
 
             Is360 = false;
 
@@ -317,6 +323,12 @@ namespace FLY.Simulation.Blowing
             /// 加热量， 数据量为 ChannelCnt
             /// </summary>
             public int[] Heats;
+            /// <summary>
+            /// 坏的加热棒
+            /// </summary>
+            public bool[] Bads;
+            public bool HasElectricCurrent;
+           
             /// <summary>
             /// 第1个加热棒，对应的 数据序号， 数据量为 1000， BeforeData.Count
             /// </summary>
@@ -375,11 +387,24 @@ namespace FLY.Simulation.Blowing
             {
                 ChannelCnt = channelcnt;
                 Heats = new int[ChannelCnt];
+                Bads = new bool[ChannelCnt];
                 Array.Clear(Heats, 0, ChannelCnt);
             }
             public event Action<ObservableCollection<int>> AfterDatasUpdateEvent;
             public void HeatApply() 
             {
+                bool current = false;
+                for (int i = 0; i < ChannelCnt; i++)
+                {
+                    if ((Bads[i] == false) && (Heats[i] > 0))
+                    {
+                        current = true;
+                        break;
+                    }
+                }
+                HasElectricCurrent = current;
+
+
                 int boltcnt = BeforeDatas.Count();
                 double b_c = (double)(boltcnt)/ChannelCnt;
                 int b = Channel1stIndex;

Project.FLY.FlyADBase/FLY.Simulation.Blowing/FLY.Simulation.Blowing.csproj

@@ -47,7 +47,9 @@
     <Compile Include="FilmLength3D.cs" />
     <Compile Include="GageAD.cs" />
     <Compile Include="HMI.cs" />
+    <Compile Include="IPlcLink.cs" />
     <Compile Include="OrgData.cs" />
+    <Compile Include="PlcLink.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
   </ItemGroup>
   <ItemGroup>
@@ -59,6 +61,10 @@
       <Project>{5EE61AC6-5269-4F0F-B8FA-4334FE4A678F}</Project>
       <Name>Misc</Name>
     </ProjectReference>
+    <ProjectReference Include="..\..\Project.FLY.ModbusMapper\FLY.ModbusMapper\FLY.ModbusMapper.csproj">
+      <Project>{6d4b9bda-2a66-4583-b244-758bc4213d9f}</Project>
+      <Name>FLY.ModbusMapper</Name>
+    </ProjectReference>
     <ProjectReference Include="..\..\Project.FLY.ModbusModule\FLY.ModbusModule\FLY.ModbusModule.csproj">
       <Project>{8e19c40f-ce7f-4982-bd90-4eb4e9e04e34}</Project>
       <Name>FLY.ModbusModule</Name>

Project.FLY.FlyADBase/FLY.Simulation.Blowing/HMI.cs

@@ -4,10 +4,11 @@ using System.Linq;
 using System.Text;
 using System.ComponentModel;
 using System.Net;
+using System.IO;
 
 namespace FLY.Simulation.Blowing
 {
-    public class HMI:INotifyPropertyChanged
+    public class HMI: IPlcLink
     {
         const int ADDR_M_HasElectricCurrent = 0;//bit 三相电 电流
         const int ADDR_M_HasFan = 1;//bit 风机启动
@@ -33,12 +34,12 @@ namespace FLY.Simulation.Blowing
         /// 风机是否启动？
         /// </summary>
         public bool HasFan { get; set; } = true;
+        public string PlcAddr { get; set; } = "127.0.0.1";
 
         UInt16 heatupdate = 1;
         UInt16 currupdate = 1;
         UInt16 heatupdate_last = 1;
         UInt16[] heats;
-        bool[] Bads;
         public Blowing.AirRing mAirRing;
         FLY.ModbusModule.ClientTCP mbclient;
 
@@ -46,26 +47,34 @@ namespace FLY.Simulation.Blowing
 
         public HMI() 
         {
-            mbclient = new FLY.ModbusModule.ClientTCP(IPAddress.Parse("127.0.0.1"));
+
+            if (!Load())
+                Save();
 
             heats = new UInt16[100];
-            Bads = new bool[100];
+
             Array.Clear(heats, 0, 100);
-            Array.Clear(Bads, 0, 100);
 
-            Bads[2] = true;
-            Bads[30] = true;
+
+
             heatupdate = 1;
             heatupdate_last = 1;
             currupdate = 1;
 
-            mbclient.PropertyChanged += new PropertyChangedEventHandler(mbclient_PropertyChanged);
 
-            //每1秒读取一次
-            FObjBase.PollModule.Current.Poll_Config(FObjBase.PollModule.POLL_CONFIG.ADD, 
-                new FObjBase.PollModule.PollHandler(OnPoll),TimeSpan.FromMilliseconds(200) );
+
         }
+        public void Init(Blowing.AirRing mAirRing) 
+        {
+            this.mAirRing = mAirRing;
+
+            mbclient = new FLY.ModbusModule.ClientTCP(IPAddress.Parse(PlcAddr));
 
+            mbclient.PropertyChanged += new PropertyChangedEventHandler(mbclient_PropertyChanged);
+            //每1秒读取一次
+            FObjBase.PollModule.Current.Poll_Config(FObjBase.PollModule.POLL_CONFIG.ADD,
+                new FObjBase.PollModule.PollHandler(OnPoll), TimeSpan.FromMilliseconds(200));
+        }
         void mbclient_PropertyChanged(object sender, PropertyChangedEventArgs e)
         {
             if (e.PropertyName == "IsConnected") 
@@ -134,23 +143,61 @@ namespace FLY.Simulation.Blowing
                 mAirRing.HeatApply();
                 SendHeats();
 
-                bool current = false;
-                for (int i = 0; i < mAirRing.ChannelCnt; i++)
-                {
-                    if ( (Bads[i]==false) &&  (mAirRing.Heats[i]>0))
-                    {
-                        current = true;
-                        break;
-                    }
-                }
-                HasElectricCurrent = current;
+                HasElectricCurrent = mAirRing.HasElectricCurrent;
                 CurrUpdate++;
                 SendUpdate();
 
             }
             SendStatue();
         }
+        string filePath = "airRingPlc.json";
+        bool Load()
+        {
+            return HmiJsonDb.Load(filePath, this);
+        }
+        public bool Save()
+        {
+            return HmiJsonDb.Save(filePath, this);
+        }
 
         public event PropertyChangedEventHandler PropertyChanged;
     }
+
+    public class HmiJsonDb
+    {
+        public string PlcAddr = "127.0.0.1";
+        public static bool Save(string filePath, HMI plcLink)
+        {
+            try
+            {
+                HmiJsonDb jsondb = new HmiJsonDb()
+                {
+                    PlcAddr = plcLink.PlcAddr
+                };
+                string json = Newtonsoft.Json.JsonConvert.SerializeObject(jsondb, Newtonsoft.Json.Formatting.Indented);
+                File.WriteAllText(filePath, json);
+                return true;
+            }
+            catch
+            {
+                return false;
+            }
+        }
+        public static bool Load(string filePath, HMI plcLink)
+        {
+            try
+            {
+                if (!File.Exists(filePath))
+                    return false;
+                string json = File.ReadAllText(filePath);
+                var jsonDb = Newtonsoft.Json.JsonConvert.DeserializeObject<HmiJsonDb>(json);
+                plcLink.PlcAddr = jsonDb.PlcAddr;
+                return true;
+            }
+            catch
+            {
+                return false;
+            }
+        }
+    }
 }

Project.FLY.FlyADBase/FLY.Simulation.Blowing/IPlcLink.cs

+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace FLY.Simulation.Blowing
+{
+    public interface IPlcLink: INotifyPropertyChanged
+    {
+        string PlcAddr { get; set; }
+
+        /// <summary>
+        /// 当前电流 有没？
+        /// </summary>
+        bool HasElectricCurrent { get; set; }
+
+
+        /// <summary>
+        /// 风机是否启动？
+        /// </summary>
+        bool HasFan { get; set; }
+
+
+        UInt16 HeatUpdate { get; set; }
+
+        bool Save();
+    }
+}

Project.FLY.FlyADBase/FLY.Simulation.Blowing/PlcLink.cs

+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.IO;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace FLY.Simulation.Blowing
+{
+    public class PlcLink : IPlcLink 
+    {
+        public event PropertyChangedEventHandler PropertyChanged;
+
+
+        public string PlcAddr { get; set; } = "127.168.50.60:502";
+
+        //D200	4x201 通道数量
+        //D201	4x202 设置值 更新
+        //D202	4x203 当前值 更新 //不用
+        //D400	4x401 设置值 160个
+        //D600	4x601 当前值 160个 //不用
+        //M3	0x4	风环开关
+        //M4	0x5	检测电流
+
+        public FLY.Modbus.WithThread.ServerTCP mserver;
+
+        public Blowing.AirRing mAirRing;
+
+        public UInt16 HeatUpdate { get; set; }
+
+        /// <summary>
+        /// 当前电流 有没？
+        /// </summary>
+        public bool HasElectricCurrent { get; set; } 
+
+
+        /// <summary>
+        /// 风机是否启动？
+        /// </summary>
+        public bool HasFan { get; set; } = true;
+
+
+        public PlcLink()
+        {
+            if (!Load())
+                Save();
+        }
+        public void Init(Blowing.AirRing mAirRing) 
+        {
+            this.mAirRing = mAirRing;
+            mserver = new Modbus.WithThread.ServerTCP(Misc.StringConverter.ToIPEndPoint(PlcAddr), GetValue, SetValue);
+            mserver.Start();
+        }
+
+
+        void GetValue(int addr, object values) 
+        {
+            if (values is UInt16[])
+            {
+                var uint16s = values as UInt16[];
+                for (int i = 0; i < uint16s.Count(); i++) {
+                    uint16s[i] = GetValue_reg(i+addr);
+                }
+            }
+            else if (values is bool[]) 
+            {
+                var bools = values as bool[];
+                for (int i = 0; i < bools.Count(); i++)
+                {
+                    bools[i] = GetValue_coil(i + addr);
+                }
+            }
+        }
+        UInt16 GetValue_reg(int addr) 
+        {
+            if (addr == 200)
+            {
+                return (UInt16)mAirRing.ChannelCnt;
+            }
+            else if (addr == 201)
+            {
+                return HeatUpdate;
+            }
+            else if (addr >= 400 && addr < 400 + 160)
+            {
+                int idx = addr - 400;
+                if (idx >= 0 && idx < mAirRing.Heats.Count())
+                    return (UInt16)mAirRing.Heats[idx];
+                else
+                    return 0;
+            }
+            else {
+                return 0;
+            }
+        }
+        bool GetValue_coil(int addr)
+        {
+            if (addr == 3)
+            {
+                return HasFan;
+            }
+            else if (addr == 4)
+            {
+                return HasElectricCurrent;
+            }
+            else
+            {
+                return false;
+            }
+        }
+        void SetValue(int addr, object values) 
+        {
+            if (values is UInt16[])
+            {
+                var uint16s = values as UInt16[];
+                for (int i = 0; i < uint16s.Count(); i++)
+                {
+                    SetValue_reg(i + addr, uint16s[i]);
+                }
+            }
+            else if (values is bool[])
+            {
+                var bools = values as bool[];
+                for (int i = 0; i < bools.Count(); i++)
+                {
+                    SetValue_coil(i + addr, bools[i]);
+                }
+            }
+        }
+
+        void SetValue_reg(int addr, UInt16 reg)
+        {
+            if (addr == 200)
+            {
+                mAirRing.SetChannelCnt(reg);
+            }
+            else if (addr == 201)
+            {
+                if (HeatUpdate != reg) 
+                {
+                    HeatUpdate = reg;
+                    mAirRing.HeatApply();
+                    HasElectricCurrent = mAirRing.HasElectricCurrent;
+                }
+            }
+            else if (addr >= 400 && addr < 400 + 160)
+            {
+                int idx = addr - 400;
+                if (idx >= 0 && idx < mAirRing.Heats.Count())
+                {
+                    mAirRing.Heats[idx] = reg;
+                }
+            }
+            else
+            {
+
+            }
+        }
+        void SetValue_coil(int addr, bool coil)
+        {
+
+        }
+        string filePath = "airRingPlc.json";
+        bool Load() 
+        {
+            return PlcLinkJsonDb.Load(filePath, this);
+        }
+        public bool Save() 
+        {
+            return PlcLinkJsonDb.Save(filePath, this);
+        }
+    }
+    public class PlcLinkJsonDb 
+    {
+        public string PlcAddr = "127.168.50.60:502";
+        public static bool Save(string filePath, PlcLink plcLink) 
+        {
+            try
+            {
+                PlcLinkJsonDb jsondb = new PlcLinkJsonDb()
+                {
+                    PlcAddr = plcLink.PlcAddr
+                };
+                string json = Newtonsoft.Json.JsonConvert.SerializeObject(jsondb, Newtonsoft.Json.Formatting.Indented);
+                File.WriteAllText(filePath, json);
+                return true;
+            }
+            catch {
+                return false;
+            }
+        }
+        public static bool Load(string filePath, PlcLink plcLink)
+        {
+            try
+            {
+                if (!File.Exists(filePath))
+                    return false;
+                string json = File.ReadAllText(filePath);
+                var jsonDb = Newtonsoft.Json.JsonConvert.DeserializeObject<PlcLinkJsonDb>(json);
+                plcLink.PlcAddr = jsonDb.PlcAddr;
+                return true;
+            }
+            catch
+            {
+                return false;
+            }
+        }
+    }
+}

Project.FLY.FlyADBase/FLYAD7_Simulation_Wpf/MainWindow.xaml.cs

@@ -151,8 +151,13 @@ namespace FLYAD7_Simulation_Wpf
 
         private void button2_Click(object sender, RoutedEventArgs e)
         {
-            flyad7.Save();
-            MessageBox.Show("保存成功，请重启");
+            if (MessageBox.Show("需要重启，才能生效", "提示", MessageBoxButton.OKCancel) == MessageBoxResult.OK)
+            {
+                flyad7.Save();
+                FLY.AppHelper.AppJustOne.Restart();
+            }
+
+            
         }
 
         private void button3_Click(object sender, RoutedEventArgs e)

Project.FLY.FlyADBase/FLYAD7_Simulation_Wpf/WindowBlowing.xaml

@@ -86,10 +86,16 @@
                 <GroupBox Header="电柜" Margin="2" >
                     <StackPanel >
                         <StackPanel x:Name="spPlc">
+                            <StackPanel>
+                                <TextBlock Text="PLC地址"/>
+                                <TextBox Text="{Binding PlcAddr}"/>
+                            </StackPanel>
                             <CheckBox Content="电流计" Height="16" Margin="5" IsChecked="{Binding HasElectricCurrent}" IsEnabled="False"/>
                             <CheckBox Content="风机开" Height="16" Margin="5" IsChecked="{Binding HasFan}" />
+                            <Button Content="保存PLC设置" Padding="5,2" Click="btnPlcSaveClick"/>
                         </StackPanel>
                         <CheckBox Content="屏蔽I9" Height="16" Margin="5" IsChecked="{Binding IsShieldI9}" />
+                        
                     </StackPanel>
                 </GroupBox>
             </StackPanel>

Project.FLY.FlyADBase/FLYAD7_Simulation_Wpf/WindowBlowing.xaml.cs

@@ -147,7 +147,7 @@ namespace FLYAD7_Simulation_Wpf
         private void Window_Loaded(object sender, RoutedEventArgs e)
         {
             this.DataContext = mBlowing;
-            this.spPlc.DataContext = mBlowing.mHMI;
+            this.spPlc.DataContext = mBlowing.plcLink;
             mBlowing.PropertyChanged += new System.ComponentModel.PropertyChangedEventHandler(mBlowing_PropertyChanged);
             DataBindAll();
             chart1.ChartAreas["Default"].CursorX.Position = mBlowing.TestPos;
@@ -222,8 +222,20 @@ namespace FLYAD7_Simulation_Wpf
 
         private void btnSaveClick(object sender, RoutedEventArgs e)
         {
-            mBlowing.Save();
-            MessageBox.Show("已经保存数据，请重启");
+            if (MessageBox.Show("需要重启，才能生效", "提示", MessageBoxButton.OKCancel) == MessageBoxResult.OK) 
+            { 
+                mBlowing.Save();
+                FLY.AppHelper.AppJustOne.Restart();
+            }
+        }
+
+        private void btnPlcSaveClick(object sender, RoutedEventArgs e)
+        {
+            if (MessageBox.Show("需要重启，才能生效", "提示", MessageBoxButton.OKCancel) == MessageBoxResult.OK)
+            {
+                mBlowing.plcLink.Save();
+                FLY.AppHelper.AppJustOne.Restart();
+            }
         }
     }
 }