完成 中间收卷的 WS.xml

Resource/收卷/中央收卷_设备连接变量表_20191206/EventSign_NonUnicode.csv

+ 事件内容, 触发条件, 读取地址
+ 主牵引风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(3)
+ 主牵引变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(480)
+ 二牵引变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(481)
+ 二牵引风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(6)
+ 内收卷变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(482)
+ 内收卷风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(11)
+ 外收卷变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(483)
+ 外收卷风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(14)
+ 旋转塔变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(484)
+ 旋转塔风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(17)
+ 内收翻转刀架过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(67)
+ 外收翻转刀架过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(70)
+ 二牵引拉线急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(21)
+ 电柜急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(20)
+ 主牵引拉线急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(45)
+ 外收卷急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(44)
+ 客户急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(57)
+ 内收卷急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(56)
+ 旋转塔正转已到极限位！！！请检查, OFF, 汇川H3U 监控协议.X(32)
+ 旋转塔反转已到极限位！！！请检查, OFF, 汇川H3U 监控协议.X(33)
+ 内收卷换卷气涨轴检测未到位报警！！！请检查, ON, 汇川H3U 监控协议.M(443)
+ 外收卷换卷气涨轴检测未到位报警！！！请检查, ON, 汇川H3U 监控协议.M(444)
+ 外收预警长度报警！！！请准备换卷, ON, 汇川H3U 监控协议.M(602)
+ 内收预警长度报警！！！请准备换卷, ON, 汇川H3U 监控协议.M(603)
+ 内收卷换卷提醒报警！！！请注意安全, ON, 汇川H3U 监控协议.M(50)
+ 外收卷换卷提醒报警！！！请注意安全, ON, 汇川H3U 监控协议.M(51)
+ 外收卸料臂检测报警, ON, 汇川H3U 监控协议.M(370)
+ 内收卸料臂检测报警, ON, 汇川H3U 监控协议.M(371)
+ 外收急停开启报警！！！请检查, OFF, 汇川H3U 监控协议.X(44)
+ 内收急停开启报警！！！请检查, OFF, 汇川H3U 监控协议.X(56)
+ 一牵变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(142)
+ 二牵变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(143)
+ 内收变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(144)
+ 外收变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(145)
+ 旋转变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(146)
+ 主牵引风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(3)
+ 主牵引变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(480)
+ 二牵引变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(481)
+ 二牵引风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(6)
+ 内收卷变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(482)
+ 内收卷风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(11)
+ 外收卷变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(483)
+ 外收卷风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(14)
+ 旋转塔变频故障报警！！！请检查, ON, 汇川H3U 监控协议.M(484)
+ 旋转塔风机过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(17)
+ 内收翻转刀架过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(67)
+ 外收翻转刀架过载报警！！！请检查, OFF, 汇川H3U 监控协议.X(70)
+ 二牵引拉线急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(21)
+ 电柜急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(20)
+ 主牵引拉线急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(45)
+ 外收卷急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(44)
+ 客户急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(57)
+ 内收卷急停开启！！！请复位, OFF, 汇川H3U 监控协议.X(56)
+ 旋转塔正转已到极限位！！！请检查, OFF, 汇川H3U 监控协议.X(32)
+ 旋转塔反转已到极限位！！！请检查, OFF, 汇川H3U 监控协议.X(33)
+ 内收卷换卷气涨轴检测未到位报警！！！请检查, ON, 汇川H3U 监控协议.M(443)
+ 外收卷换卷气涨轴检测未到位报警！！！请检查, ON, 汇川H3U 监控协议.M(444)
+ 外收预警长度报警！！！请准备换卷, ON, 汇川H3U 监控协议.M(602)
+ 内收预警长度报警！！！请准备换卷, ON, 汇川H3U 监控协议.M(603)
+ 内收卷换卷提醒报警！！！请注意安全, ON, 汇川H3U 监控协议.M(50)
+ 外收卷换卷提醒报警！！！请注意安全, ON, 汇川H3U 监控协议.M(51)
+ 外收卸料臂检测报警, ON, 汇川H3U 监控协议.M(370)
+ 内收卸料臂检测报警, ON, 汇川H3U 监控协议.M(371)
+ 外收急停开启报警！！！请检查, OFF, 汇川H3U 监控协议.X(44)
+ 内收急停开启报警！！！请检查, OFF, 汇川H3U 监控协议.X(56)
+ 一牵变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(142)
+ 二牵变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(143)
+ 内收变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(144)
+ 外收变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(145)
+ 旋转变频通讯故障！！！请检查, ON, 汇川H3U 监控协议.M(146)
+ 转塔正向极限锁定！！！请解除, ON, 汇川H3U 监控协议.M(1202)
+ 转塔反向极限锁定！！！请解除, ON, 汇川H3U 监控协议.M(1203)
+ 转塔正向极限锁定！！！请解除, ON, 汇川H3U 监控协议.M(1202)
+ 转塔反向极限锁定！！！请解除, ON, 汇川H3U 监控协议.M(1203)

Resource/收卷/中央收卷_设备连接变量表_20191206/Generated/WinderAccessory.cs

+
+using System.ComponentModel;
+
+namespace FLY.Winder.Common
+{
+    public class WinderAccessory : INotifyPropertyChanged
+    {
+        public WinderAccessory()
+        {
+
+        }
+
+        #region 辅助代码生成
+        /// <summary>
+        /// 设定速度(m/min)
+        /// </summary>
+        public float VelocitySet { get; set; }
+
+        /// <summary>
+        /// 速度确定(┷）
+        /// </summary>
+        public bool IsVelocityChanged { get; set; }
+
+        /// <summary>
+        /// 速度显示(m/min)
+        /// </summary>
+        public float Velocity { get; set; }
+
+        /// <summary>
+        /// 上牵引电机电流(A)
+        /// </summary>
+        public float Traction1Current { get; set; }
+
+        /// <summary>
+        /// 上牵引开启显示
+        /// </summary>
+        public bool IsTraction1On { get; set; }
+
+        /// <summary>
+        /// 上牵引开启设置
+        /// </summary>
+        public bool IsTraction1OnSet { get; set; }
+
+        /// <summary>
+        /// 二牵引设定张力(kg)
+        /// </summary>
+        public float Traction2TensionKgSet { get; set; }
+
+        /// <summary>
+        /// 二牵引实际张力(kg)
+        /// </summary>
+        public float Traction2TensionKg { get; set; }
+
+        /// <summary>
+        /// 二牵引电机电流(A)
+        /// </summary>
+        public float Traction2Current { get; set; }
+
+        /// <summary>
+        /// 二牵引手动
+        /// </summary>
+        public bool IsTraction2Manual { get; set; }
+
+        /// <summary>
+        /// 二牵引开启显示
+        /// </summary>
+        public bool IsTraction2On { get; set; }
+
+        /// <summary>
+        /// 二牵引开启设置
+        /// </summary>
+        public bool IsTraction2OnSet { get; set; }
+
+        /// <summary>
+        /// 旋转塔正转
+        /// </summary>
+        public bool IsRotaryForw { get; set; }
+
+        /// <summary>
+        /// 旋转塔反转
+        /// </summary>
+        public bool IsRotaryBackw { get; set; }
+
+        /// <summary>
+        /// 旋转塔正向机械限位
+        /// </summary>
+        public bool IsRotaryForwLimit { get; set; }
+
+        /// <summary>
+        /// 旋转塔正转换向限位
+        /// </summary>
+        public bool IsRotaryForwTurn { get; set; }
+
+        /// <summary>
+        /// 旋转塔复位原点限位
+        /// </summary>
+        public bool IsRotaryOrgSign { get; set; }
+
+        /// <summary>
+        /// 旋转塔反转换向限位
+        /// </summary>
+        public bool IsRotaryBackwTurn { get; set; }
+
+        /// <summary>
+        /// 旋转塔反向机械限位
+        /// </summary>
+        public bool IsRotaryBackwLimit { get; set; }
+
+        /// <summary>
+        /// 旋转塔电机频率设定(Hz)
+        /// </summary>
+        public float RotaryFreqSet { get; set; }
+
+        /// <summary>
+        /// 旋转塔电机频率确定
+        /// </summary>
+        public bool IsRotaryFreqChanged { get; set; }
+
+        /// <summary>
+        /// 旋转塔电机频率显示(Hz)
+        /// </summary>
+        public float RotaryFreq { get; set; }
+
+        /// <summary>
+        /// 旋转塔电机电流(A)
+        /// </summary>
+        public float RotaryCurrent { get; set; }
+
+        /// <summary>
+        /// 旋转塔复位指示
+        /// </summary>
+        public bool IsRotaryOrg { get; set; }
+
+        /// <summary>
+        /// 旋转塔复位(┷）
+        /// </summary>
+        public bool RotaryOrg { get; set; }
+
+        /// <summary>
+        /// 旋转塔开启指示
+        /// </summary>
+        public bool IsRotaryOn { get; set; }
+
+        /// <summary>
+        /// 旋转塔开启(┷）
+        /// </summary>
+        public bool RotaryOn { get; set; }
+
+        /// <summary>
+        /// 一牵引调试On
+        /// </summary>
+        public bool IsTraction1Debug { get; set; }
+
+        /// <summary>
+        /// 一牵引辊筒直径
+        /// </summary>
+        public float Traction1RollerD { get; set; }
+
+        /// <summary>
+        /// 一牵引传动速比
+        /// </summary>
+        public float Traction1GearRatio { get; set; }
+
+        /// <summary>
+        /// 一牵引同步速度
+        /// </summary>
+        public float Traction1SyncV { get; set; }
+
+        /// <summary>
+        /// 一牵引实际速度
+        /// </summary>
+        public float Traction1Velocity { get; set; }
+
+        /// <summary>
+        /// 二牵引张力反馈
+        /// </summary>
+        public float Traction2Tension { get; set; }
+
+        /// <summary>
+        /// 二牵引张力设定
+        /// </summary>
+        public float Traction2TensionSet { get; set; }
+
+        /// <summary>
+        /// 二牵引增益设定
+        /// </summary>
+        public float Traction2Gain { get; set; }
+
+        /// <summary>
+        /// 二牵引积分时间
+        /// </summary>
+        public float Traction2ITime { get; set; }
+
+        /// <summary>
+        /// 二牵引调节系数
+        /// </summary>
+        public float Traction2Factor { get; set; }
+
+        /// <summary>
+        /// 二牵引辊筒直径
+        /// </summary>
+        public float Traction2RollerD { get; set; }
+
+        /// <summary>
+        /// 二牵引传动速比
+        /// </summary>
+        public float Traction2GearRatio { get; set; }
+
+        /// <summary>
+        /// 二牵引PID结果
+        /// </summary>
+        public float Traction2PIDResult { get; set; }
+
+        /// <summary>
+        /// 二牵引PID调节
+        /// </summary>
+        public float Traction2PIDAdjust { get; set; }
+
+        /// <summary>
+        /// 二牵引同步速度
+        /// </summary>
+        public float Traction2SyncV { get; set; }
+
+        /// <summary>
+        /// 二牵引实际速度
+        /// </summary>
+        public float Traction2Velocity { get; set; }
+
+        /// <summary>
+        /// 速度系数
+        /// </summary>
+        public float VelocityFactor { get; set; }
+
+        /// <summary>
+        /// 加减时间
+        /// </summary>
+        public float AccDecTime { get; set; }
+
+        /// <summary>
+        /// 二牵引升降增益
+        /// </summary>
+        public float Traction2LiftGain { get; set; }
+
+        /// <summary>
+        /// 张力检测设定
+        /// </summary>
+        public float TensionDetection { get; set; }
+
+        /// <summary>
+        /// 收卷计米辊周长(mm)
+        /// </summary>
+        public float WinderMeasurePerimeter { get; set; }
+
+        /// <summary>
+        /// 张力检测量程(kg)
+        /// </summary>
+        public float TensionDetectionRange { get; set; }
+
+        /// <summary>
+        /// 主牵引风机过载报警！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_Traction1Fan { get; set; }
+
+        /// <summary>
+        /// 主牵引变频故障报警！！！请检查(ON)
+        /// </summary>
+        public bool IsError_Traction1VFD { get; set; }
+
+        /// <summary>
+        /// 二牵引变频故障报警！！！请检查(ON)
+        /// </summary>
+        public bool IsError_Traction2VFD { get; set; }
+
+        /// <summary>
+        /// 二牵引风机过载报警！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_Traction2Fan { get; set; }
+
+        /// <summary>
+        /// 旋转塔变频故障报警！！！请检查(ON)
+        /// </summary>
+        public bool IsError_RotaryVFD { get; set; }
+
+        /// <summary>
+        /// 旋转塔风机过载报警！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_RotaryFan { get; set; }
+
+        /// <summary>
+        /// 二牵引拉线急停开启！！！请复位(OFF)
+        /// </summary>
+        public bool IsError_Traction2Scram { get; set; }
+
+        /// <summary>
+        /// 电柜急停开启！！！请复位(OFF)
+        /// </summary>
+        public bool IsError_Scram { get; set; }
+
+        /// <summary>
+        /// 主牵引拉线急停开启！！！请复位(OFF)
+        /// </summary>
+        public bool IsError_Traction1Scram { get; set; }
+
+        /// <summary>
+        /// 客户急停开启！！！请复位(OFF)
+        /// </summary>
+        public bool IsError_CustomerScram { get; set; }
+
+        /// <summary>
+        /// 旋转塔正转已到极限位！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_RotaryForwLimit { get; set; }
+
+        /// <summary>
+        /// 旋转塔反转已到极限位！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_RotaryBackwLimit { get; set; }
+
+        /// <summary>
+        /// 转塔正向极限锁定！！！请解除(ON)
+        /// </summary>
+        public bool IsError_RotaryForwLock { get; set; }
+
+        /// <summary>
+        /// 转塔反向极限锁定！！！请解除(ON)
+        /// </summary>
+        public bool IsError_RotaryBackwLock { get; set; }
+
+        /// <summary>
+        /// 一牵变频通讯故障！！！请检查(ON)
+        /// </summary>
+        public bool IsError_Traction1CommErr { get; set; }
+
+        /// <summary>
+        /// 二牵变频通讯故障！！！请检查(ON)
+        /// </summary>
+        public bool IsError_Traction2CommErr { get; set; }
+
+        /// <summary>
+        /// 旋转变频通讯故障！！！请检查(ON)
+        /// </summary>
+        public bool IsError_RotaryCommErr { get; set; }
+
+        #endregion
+
+        public event PropertyChangedEventHandler PropertyChanged;
+    }
+}

Resource/收卷/中央收卷_设备连接变量表_20191206/Generated/WinderInsideOutside.cs

+
+using System.ComponentModel;
+
+namespace FLY.Winder.Common
+{
+    public class WinderInsideOutside : INotifyPropertyChanged
+    {
+
+        #region 辅助代码生成
+        /// <summary>
+        /// 收卷实际m
+        /// </summary>
+        public float MeasureLen { get; set; }
+
+        /// <summary>
+        /// 收卷设定m
+        /// </summary>
+        public float MeasureLenSet { get; set; }
+
+        /// <summary>
+        /// 收卷预警m
+        /// </summary>
+        public float MeasurePreWarning { get; set; }
+
+        /// <summary>
+        /// 收卷计量关
+        /// </summary>
+        public bool MeasureStop { get; set; }
+
+        /// <summary>
+        /// 收卷计量清零(┷）
+        /// </summary>
+        public bool MeasureReset { get; set; }
+
+        /// <summary>
+        /// 收卷翻转点动(┷）
+        /// </summary>
+        public bool TurnoverInching { get; set; }
+
+        /// <summary>
+        /// 收卷切膜飞刀(┷）
+        /// </summary>
+        public bool CuttingFilm { get; set; }
+
+        /// <summary>
+        /// 收卷翻转原点(┷）
+        /// </summary>
+        public bool TurnoverOrg { get; set; }
+
+        /// <summary>
+        /// 收卷压臂平移(┷）
+        /// </summary>
+        public bool PressureArmOffset { get; set; }
+
+        /// <summary>
+        /// 收卷翻转上位等待(s)
+        /// </summary>
+        public float TurnoverUpperWait { get; set; }
+
+        /// <summary>
+        /// 收卷翻转原点延时(s)
+        /// </summary>
+        public float TurnoverOrgDelay { get; set; }
+
+        /// <summary>
+        /// 收卷翻转返回延时(s)
+        /// </summary>
+        public float TurnoverBackDelay { get; set; }
+
+        /// <summary>
+        /// 收卷锯齿切膜延时(s)
+        /// </summary>
+        public float CuttingFilmDelay { get; set; }
+
+        /// <summary>
+        /// 收卷锯齿切膜时间(s)
+        /// </summary>
+        public float CuttingFilmElapsed { get; set; }
+
+        /// <summary>
+        /// 收卷压臂返回时间(s)
+        /// </summary>
+        public float PressureArmBackElapsed { get; set; }
+
+        /// <summary>
+        /// 收卷气涨轴检测报警(s)
+        /// </summary>
+        public float AirRollerCheck { get; set; }
+
+        /// <summary>
+        /// 收卷一次平移时间(s)
+        /// </summary>
+        public float OffsetElapsed { get; set; }
+
+        /// <summary>
+        /// 收卷平移停顿时间(s)
+        /// </summary>
+        public float ElapsedWait { get; set; }
+
+        /// <summary>
+        /// 收卷接料限幅
+        /// </summary>
+        public float TapeLimit { get; set; }
+
+        /// <summary>
+        /// 收卷设定张力(kg)
+        /// </summary>
+        public float TensionKgSet { get; set; }
+
+        /// <summary>
+        /// 收卷实际张力(kg)
+        /// </summary>
+        public float TensionKg { get; set; }
+
+        /// <summary>
+        /// 收卷电机电流(A)
+        /// </summary>
+        public float Current { get; set; }
+
+        /// <summary>
+        /// 收卷手动
+        /// </summary>
+        public bool IsManual { get; set; }
+
+        /// <summary>
+        /// 收卷开启显示
+        /// </summary>
+        public bool IsOn { get; set; }
+
+        /// <summary>
+        /// 收卷开启设置
+        /// </summary>
+        public bool IsOnSet { get; set; }
+
+        /// <summary>
+        /// 收卷张力反馈
+        /// </summary>
+        public float Tension { get; set; }
+
+        /// <summary>
+        /// 收卷张力设定
+        /// </summary>
+        public float TensionSet { get; set; }
+
+        /// <summary>
+        /// 收卷增益设定
+        /// </summary>
+        public float Gain { get; set; }
+
+        /// <summary>
+        /// 收卷积分时间
+        /// </summary>
+        public float ITime { get; set; }
+
+        /// <summary>
+        /// 收卷调节系数
+        /// </summary>
+        public float Factor { get; set; }
+
+        /// <summary>
+        /// 收卷辊筒直径
+        /// </summary>
+        public float RollerD { get; set; }
+
+        /// <summary>
+        /// 收卷传动速比
+        /// </summary>
+        public float GearRatio { get; set; }
+
+        /// <summary>
+        /// 收卷PID结果
+        /// </summary>
+        public float PIDResult { get; set; }
+
+        /// <summary>
+        /// 收卷PID调节
+        /// </summary>
+        public float PIDAdjust { get; set; }
+
+        /// <summary>
+        /// 收卷同步速度
+        /// </summary>
+        public float SyncV { get; set; }
+
+        /// <summary>
+        /// 收卷实际速度
+        /// </summary>
+        public float Velocity { get; set; }
+
+        /// <summary>
+        /// 收卷升降增益
+        /// </summary>
+        public float LiftGain { get; set; }
+
+        /// <summary>
+        /// 收卷速度补偿
+        /// </summary>
+        public float VelocityComp { get; set; }
+
+        /// <summary>
+        /// 收卷变频故障报警！！！请检查(ON)
+        /// </summary>
+        public bool IsError_VFD { get; set; }
+
+        /// <summary>
+        /// 收卷风机过载报警！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_Fan { get; set; }
+
+        /// <summary>
+        /// 收翻转刀架过载报警！！！请检查(OFF)
+        /// </summary>
+        public bool IsError_Turnover { get; set; }
+
+        /// <summary>
+        /// 收卷急停开启！！！请复位(OFF)
+        /// </summary>
+        public bool IsError_Scram { get; set; }
+
+        /// <summary>
+        /// 收卷换卷气涨轴检测未到位报警！！！请检查(ON)
+        /// </summary>
+        public bool IsError_AirRollerNoReady { get; set; }
+
+        /// <summary>
+        /// 收预警长度报警！！！请准备换卷(ON)
+        /// </summary>
+        public bool IsError_MeasurePreWarning { get; set; }
+
+        /// <summary>
+        /// 收卷换卷提醒报警！！！请注意安全(ON)
+        /// </summary>
+        public bool IsError_ChangeRoll { get; set; }
+
+        /// <summary>
+        /// 收卸料臂检测报警(ON)
+        /// </summary>
+        public bool IsError_UnloadArm { get; set; }
+
+        /// <summary>
+        /// 变频通讯故障！！！请检查(ON)
+        /// </summary>
+        public bool IsError_CommErr { get; set; }
+
+        #endregion
+        public event PropertyChangedEventHandler PropertyChanged;
+    }
+}

Resource/收卷/中央收卷_设备连接变量表_20191206/Generated/cp_ws.ps1

+$root_path = $PSScriptRoot
+
+$src_path = $root_path + "\WS.xml"
+$dest_dir = $root_path + "\..\..\..\..\Project.FLY.Winder_20190413\FLY.Winder.UI.Server\bin\Debug\Gage1"
+$dest_path = $dest_dir + "\WS.xml"
+if(-not (Test-Path $dest_dir))
+{
+    echo  $dest_dir
+    mkdir $dest_dir
+}
+
+echo  WS.xml
+cp $src_path $dest_path
+
+echo Ƴɹ 
+pause
\ No newline at end of file