修复 限制分区序号范围，解决之前的 org_thicks[boltindex] 溢出问题

Project.FLY.Thick.Blowing/FLY.Thick.Blowing/Server/BlowingDetect.cs

@@ -116,17 +116,17 @@ namespace FLY.Thick.Blowing.Server
         /// <summary>
         /// 自定义 转向信号 输入口序号 从0开始 默认9-1
         /// </summary>
-        public int InNo_Limit0 { get; set; } = FlyADIODefine.Instance.InNo_Limit0;
+        public int InNo_Limit0 { get; set; } = 9 - 1;
 
         /// <summary>
         /// 自定义 转向信号 输入口序号 从0开始 默认10-1
         /// </summary>
-        public int InNo_Limit1 { get; set; } = FlyADIODefine.Instance.InNo_Limit1;
+        public int InNo_Limit1 { get; set; } = 10 - 1;
 
         /// <summary>
         /// 自定义 辊速度 输入口序号 从0开始 默认11-1
         /// </summary>
-        public int InNo_Roll { get; set; } = FlyADIODefine.Instance.InNo_Roll;
+        public int InNo_Roll { get; set; } = 11 - 1;
         #endregion
 
         #region 状态
@@ -1729,8 +1729,8 @@ namespace FLY.Thick.Blowing.Server
         /// </summary>
         /// <param name="a">与0°的偏移, 0~180</param>
         /// <param name="dt">时间点</param>
-        /// <param name="angle0">上面的膜对应的膜角度</param>
-        /// <param name="angle1">下面的膜对应的膜角度</param>
+        /// <param name="angle0">上面的膜对应的膜角度 [0~360)</param>
+        /// <param name="angle1">下面的膜对应的膜角度 [0~360)</param>
         /// <param name="direction">人字架正转？反转? FIX, 停止！</param>
         /// <param name="rotationCnt">扫描次数</param>
         /// <param name="inCV">在恒速阶段</param>

Project.FLY.Thick.BlowingScan/FLY.Thick.BlowingScan/Server/GM_BlowingScan.cs

@@ -226,7 +226,12 @@ namespace FLY.Thick.BlowingScan.Server
                 }
             }
 
-
+            /// <summary>
+            /// 角度转分区序号, 角度范围[0~360°)
+            /// </summary>
+            /// <param name="a">膜泡角度[0~360°)</param>
+            /// <param name="orgboltno">复位区号</param>
+            /// <returns></returns>
             int GetBoltIndexFromAngle(double a, int orgboltno)
             {
                 int boltno1st = 1;
@@ -235,8 +240,11 @@ namespace FLY.Thick.BlowingScan.Server
 
                 boltindex += orgboltno - boltno1st;
 
-                if (boltindex >= nbolts)
-                    boltindex -= nbolts;
+                //100%确保输出的序号在有效范围内
+                while (boltindex < 0)
+                    boltindex += nbolts;//正常情况不会调用
+                while (boltindex>=nbolts)
+                    boltindex -= nbolts;//极端情况，a=360.2°, 这个会调用2次
 
                 return boltindex;
             }
@@ -1137,7 +1145,7 @@ namespace FLY.Thick.BlowingScan.Server
 
                 int pos = i * posOfGrid + posOfGrid / 2;//一个grid的中间脉冲，也就是大概而已
                 double thk = double.NaN;
-                if (Misc.MyBase.ISVALIDATA(dat[idx]))
+                if (!double.IsNaN(dat[idx]))
                     thk = Ad2Thk(dat[idx]) * 2;
 
                 pos -= scaninfocell.beginPos;//膜上面的位置
@@ -1525,7 +1533,7 @@ namespace FLY.Thick.BlowingScan.Server
             if (double.IsNaN(avg))//平均值不合法！！！！
                 return false;
 
-            if (avg < 500)//值太小！！！
+            if (avg < 5)//小于5um ，太小！！！
                 return false;
 
             List<EquationCell> equationlist = new List<EquationCell>();
@@ -1699,7 +1707,7 @@ namespace FLY.Thick.BlowingScan.Server
                 {
                     //失败，删除！！！
                     for (int i = 0; i < scaninfo.thks.Count(); i++)
-                        scaninfo.thks[i] = Misc.MyBase.NULL_VALUE;
+                        scaninfo.thks[i] = double.NaN;
                 }
                 scaninfo.lockbm = true;
                 return true;